Concrete Pump Service & Maintenance – Chorula, Poland

Concrete pump service – why regular maintenance is an investment, not a cost

A concrete pump operates under extreme conditions: highly abrasive concrete, hydraulic pressure up to 350 bar, operating temperatures exceeding 80°C. In these conditions, component wear is not a question of “if” but “when”. Regular servicing answers that question proactively, before a minor issue becomes a five-figure repair.

PHS Magnum has been servicing concrete pumps for over 30 years. We service Putzmeister, Cifa, Schwing, Mecbo, Sermac and Teka – boom pumps, trailer pumps and truck mixer pumps.

What does our concrete pump service include?

500-hour service (standard)

The 500-hour service interval is the minimum recommended by all manufacturers:

• Hydraulic oil – cleanliness, viscosity and water content check. Oil change if contamination or acid value exceeded.
• Hydraulic filter – replacement. A clogged filter increases system pressure and accelerates hydraulic pump wear.
• S-valve (diverter valve) – seal check, stroke adjustment, cutting edge wear inspection.
• Concrete cylinders and rubber pistons – clearance measurement, visual inspection.
• Hoses and hydraulic connections – visual and pressure check.
• Boom lubrication – all lubrication points: pin joints, slewing bearings, boom cylinders.
• Electrical system – cable condition, connectors, pressure sensors, CAN-bus.

1000-hour service (extended)

Additionally every 1000 hours:

• Concrete cylinder regeneration or replacement check
• S-valve inspection and cutting edge regeneration if worn
• Full boom inspection for weld cracks (EN 12001 requirement)
• Preventive rubber piston replacement

Mobile on-site service

Our service vehicles are equipped with:

• Essential spare parts (pistons, seals, filters, hoses)
• Hydraulic unit for flushing the system
• Diagnostic tools for CAN-bus systems (Putzmeister Ergotronic, Cifa Logica, Schwing Eco)

Service coverage: Poland and German border regions (up to 300 km from Chorula).

Why choose PHS Magnum for your concrete pump service?

Experience – 30+ years with concrete pumps. We have seen hundreds of failures and know what breaks regularly.

Original or certified OEM parts – we never use counterfeits. Parts with traceability (batch tracking).

Documentation – full service report after every service, required for warranty claims and machine resale.

ISO 9001:2015 – our quality management system covers service processes.

Close to Germany – 180 km from the German border, 4 km from motorway A4. We can collect pumps from Germany or travel to DACH customers.