In Brief
Concrete pump service near Opole — PHS Magnum in Chorula (~20 km from Opole, 4 km from the A4 Gogolin junction) services Putzmeister, Cifa, Schwing, Mecbo, and other brands. Scheduled 500 h/1000 h services, hydraulic repairs, TDT statutory inspections, mobile on-site callouts across the region. Tel.: +48 602 716 551.
Location: Chorula near Opole — A4 Gogolin Junction 4 km
PHS Magnum is based in Chorula (Gogolin municipality, Krapkowice county) — 4 km from the Gogolin exit on the A4 motorway, approximately 20 km south-east of Opole.
| Town | Distance | Travel time |
|---|---|---|
| Opole | ~20 km | ~20–25 min |
| Gogolin | ~5 km | ~5 min |
| Krapkowice | ~6 km | ~10 min |
| Strzelce Opolskie | ~25 km | ~25 min |
| Kędzierzyn-Koźle | ~30 km | ~30 min |
| Brzeg | ~60 km | ~50 min |
| Nysa | ~55 km | ~1 h |
| Gliwice (A4) | ~55 km | ~40 min |
Mobile On-Site Service across the Opole Region
We operate a dedicated mobile service vehicle for customers throughout the Opole region.
What We Bring on a Callout
- CAN-bus diagnostic tester (Putzmeister, Cifa, Schwing)
- Comprehensive seals and O-ring kit (covering 90% of typical repairs)
- Rubber pistons for 80–90 mm pumps (most common sizes)
- Portable MIG/MAG welding unit
- Specialist spanners and tooling for concrete pumps
- Hydraulic oil top-up supply (HVLP 46)
Typical Response Times in the Opole Region
| Situation | Response time |
|---|---|
| Critical breakdown (work stopped) | 2–3 hours from call |
| Urgent fault | Same working day |
| Planned on-site service | Pre-arranged appointment |
Workshop Services (Chorula)
Scheduled Maintenance
500-hour service:
- Hydraulic oil and filter change
- S-valve inspection and adjustment
- Concrete cylinder and piston check
- Boom lubrication (pivot joints)
- CAN-bus and sensor inspection
1000-hour service:
- Everything in the 500 h service, plus:
- Concrete cylinder wear measurement
- NDT weld inspection of the boom
- Hydraulic filter replacement
- Full electrical system check
Repairs
- Hydraulics (pump, control valves, cylinders)
- Concrete pumping unit (cylinders, pistons, seals)
- Boom (welding, section replacement, bearings)
- Electronics and CAN-bus
- Engine (in cooperation with authorised service partners)
Brands Serviced in the Opole Region
- Putzmeister — BSF, M-Tec, Pumi (truck mixer pumps)
- Cifa — K-Line, Carbotech
- Schwing — S-Line, Stetter (truck mixer pumps)
- Mecbo — P4 and other models
- Sermac — all models
The full scope of work for each brand is described on our concrete pump service page, and details of pumping unit and hydraulic repairs are covered on the pump repair page.
Concrete Pumps — Opole Voivodeship
If you are searching for “concrete pump Opole region” or “truck mixer pump Opole” in the context of servicing and repairs — you are in the right place. We do not hire out pumps or carry out concreting work; we keep the machines of companies that do in operational condition. We serve owners of boom pumps, trailer pumps, and truck mixer pumps across the entire Opole Voivodeship:
- Opole and surrounding area — our largest concentration of customers; travel time ~20–25 minutes
- Krapkowice and Gogolin — immediate neighbours to our base; reachable in minutes
- Kędzierzyn-Koźle and Strzelce Opolskie — within ~30 minutes
- Brzeg, Nysa, Prudnik, Kluczbork — full on-site service or transport of the machine to Chorula
Truck mixer pumps from the Opole region are serviced in full — pumping unit, mixer drum drive, and hydraulics — while mixer bodies without a pumping unit are handled under our concrete mixer service offering.
Common Faults on Pumps in the Opole Region
Mobile diagnostics are most efficient when the customer can describe the symptom. The table below covers the typical situations we are called out to in the Opole area — use it as a guide, not as a substitute for an inspection.
| Symptom | Most likely cause | Action |
|---|---|---|
| No output pressure or pressure drop | Worn rubber pistons or concrete cylinders | Wear measurement, piston replacement / cylinder reconditioning |
| Erratic S-valve operation | Worn seals, play in the actuator | S-valve seal replacement and adjustment |
| Controller error, loss of communication | CAN-bus fault, sensor failure | CAN-bus diagnostics, sensor location and replacement |
| Hydraulic oil leak | Damaged cylinder or hose seal | Seal / hose replacement, oil top-up |
| Boom fails to hold position | Cylinder leak, air in system | Cylinder repair, hydraulic bleeding |
If a TDT statutory inspection is coming up, it is worth combining the repair with a TDT inspection — pressure-system faults must be resolved before a certificate can be issued. An overview of pump types can be found on the concrete pump types page.
How to Book an On-Site Callout from the Opole Area — Step by Step
- Log the call — ring +48 602 716 551, give the make, model, and serial number.
- Describe the fault — symptoms, any error code from the controller, a photo if possible.
- Set the priority — critical breakdown (work stopped) versus planned service.
- Callout — in the Opole region, typically 2–3 hours from the call for a critical breakdown.
- Repair or collection — minor repairs are completed on-site; larger jobs are carried out at our workshop in Chorula.
Contact
Tel.: +48 602 716 551 | Email: biuro@magnumchorula.pl
Related: Pump Service · TDT Inspections · Contact · PHS Magnum – Specialist Trailer Service
